Does Dog Fence Wire Need to be Buried?

This post may contain affiliate links. Please read our disclosure.

Dog fence wire installation is may sometimes involve putting the wire underground or on the surface. Dog owners often wonder if they need to bury the wire around their fence.

As per the design, the fence wire should be able to work with the transmitters regardless of where and how they have been installed.

So, do you have to bury dog fence wire?

The answer is that it’s not necessary, but it can help keep your dog from getting tangled in the wire or chewing on the wires themselves and potentially hurting their mouth.

How deep to bury dog fence wire: If you would still like to bury the wire, be sure to do so at least 8 inches below ground level and at least 3 feet away from any other obstacles such as trees, shrubs, sidewalks, or driveway entrances.

If burying isn’t an option for some reason then consider using a protective coating on the wires if possible. This will help protect against wear and tear caused by dogs running into them while playing outside.

Easiest Way to Bury Dog Fence Wire

The easiest way is to bury it in a trench. You want the trench to be deep and wide enough that you’re not accidentally exposing any of it when you cover it up.

  1. Dig a shallow groove about two inches deep with either a shovel or nail set.
  2. Attach one end of the wire to an “L-clip,” a metal U-shaped device that will allow you to attach it and pull it along with the fence.
  3. Scrape away the grass on both sides of your trench, once you have securely attached one end of your wire to the L-clip.
  4. Take out a small section of your trench and insert the L-clip into this small gap.
  5. Pull on each side if necessary until you feel secure in its position.
  6. Finally, push up some soil from where you inserted the clip until it’s fully buried, and then fill in gaps in between clips as well.

Invisible Fence Wire Trencher

An invisible fence wire trencher is a valuable tool for dog owners who want to keep their yards looking neat and tidy. The trencher can be used to dig up the old wire that surrounds your property and replace it with a new one.

It’s also an excellent option for people who have just moved into a house and don’t know what kind of fencing was there before they arrived.

The process takes about 20 minutes on average, which means you won’t need to invest too much time or money in order to get the job done right!


Check Also

Invisible Fence Problems: Beeping, Not Working & Resetting

This post may contain affiliate links. Please read our disclosure. Invisible Fences have been a great …

Leave a Reply

Your email address will not be published. Required fields are marked *